Studio
Equipment - Slip Pouring
Units
|
|
Slip Pump
The SP4 is powered by a 1/2 HP
motor with a pumping capacity of 7 g.p.m. It has an 8’ x 1” hose with
utility nozzle and a working depth of 20” (Lengths up to 30” are
available by special order). This unit will mount to either a round or
square container with the mounting brackets which are provided. Shipping
weight: 26 lbs. F.O.B. Kentland, IN 47951
C-125-010
Price: $316.00
|
|
|
|
Slip
Pump Model
RM30 (Replaces Model M30)
Like its predecessor the M30, the new RM30 has a unique reverse pump
action. With the flip of a switch, this machine can go from filling
to draining molds. The utility nozzles control slip flow from a
trickle to a full 5 gallons per minute to suit any size mold. When
reversed, the RM30 uses a drain tube (attached to the nozzle) that
is specially designed not to damage fresh castings by drawing slip
in from the sides. A real back saver for individuals working with
large molds! 3 heavy duty casters allow easy mobility through the
studio from mold to mold. The RM30 has a 1/3 h.p. motor and fully
enclosed pump system - no bearings or seals are exposed to the slip.
The pump gently agitates and conditions the slip, keeping it in ideal
casting condition. The 30 gallon fiberglass tank, sturdy steel frame
and heavy duty casters make this a real studio workhorse.
Dimensions: 24” diameter x 45” tall (total height). Shipping
Weight: 125 lbs. F.O.B. Kentland,
IN
Please note:
This unit is not designed to mix slip from dry ingredients or to
reclaim scrap – it is to be used for filling and draining molds
only. For Mixers, click the link at the bottom of this page.
C-125-015
List Price: $1695.05
Bailey Price: $1339.00
|
|
|
Model CT6 Casting Table with PP30 Slip Pump
|
Casting
Table
This table is designed for draining molds and recollecting slip.
The fiberglass tray has individually removable dowels and
slopes to a 2” center drain with shut off. Slip can be drained into
a bucket placed underneath or into the PP30 pump unit as shown at
left for
efficient re-processing. The frame and legs are steel designed to
support a ton of weight.
Slip Pump Model
PP30 & PP30T
Both units feature a 30 Gal fiberglass tank, heavy duty steel frame
with castors and an SP4 pump. Sturdy wooden dowels across the top of
the tank support molds while draining. The PP30 stands just 22”
high and can easily roll under a drain table as shown at left.
The PP30T stands 32” high. Both the dowels and the pump are
removable for easy cleaning.
Please note: This unit
is not designed to mix slip from dry ingredients or to reclaim scrap
– it is to be used for filling and draining molds only. For
Mixers, click the link at the bottom of this page.
|
|
Casting
Table & Slip Pumps |
|
Item
No. |
Description |
Ship Wt. |
Price |
Purchase |
| C-125-029 |
Casting Table
Model CT6-L
26” W x 64” L x 32” H
|
95 lbs.
|
$513.00
|
|
| C-125-034 |
Slip Pump
Model PP30
22” W x 25” L x 22” H
|
70 lbs.
|
$820.00
|
|
| C-125-035 |
Slip Pump
Model PP30T
22” W x 25” L x 32” H
|
80 lbs.
|
$855.00
|
|
|
|
|
|
|
Slip
Mixers & Accessories |
Slip
Production Equipment
TOP
| MASTER INDEX
|
|
