SUMMER SALE
10% Off Bailey Spray Gun List Price
Shop on-line as you would normally and checkout. Our sales staff will deduct the various discounts from the List Price shown and send a notification by email with your adjusted total before charging your account or credit card.

Fig. 1

Bailey Spray Gun

NEW & IMPROVED! Since its introduction in 1996, the Bailey Spray Gun has become our most popular spray gun ever! Its smart “siphon action” design and convenient interchangeable bottle system have proven ideal for spraying ceramic glazes.

Because the Bailey operates by siphon action, glaze never contacts any moveable parts so they don’t freeze-up or wear-down over time. The liquid nozzle and liquid tube are the only two parts that ever come into contact with the glaze and both are easily accessible for periodic replacement. Due to the especially abrasive nature of ceramic materials, these parts were prone to wear over time until...

NOW! As of the Fall of ‘99, all Bailey Spray Guns feature a Stainless Steel Liquid Tube & Nozzle! Tried, tested and proven far superior to the originals, these new Stainless Steel parts may never need replacing! If you already own a Bailey Spray Gun, you can purchase Stainless Steel replacement parts and upgrade your gun. This new feature makes our gun virtually maintenance free!

The “NEW” Bailey Spray Gun still features our convenient interchangeable plastic bottles for the easiest glaze storage and changeover. No hassles with cleaning out the gun and canister between colors. When you want to change glazes, just remove the current bottle, rinse the gun with a clean bottle of water, and attach the next glaze bottle. It’s as simple as that! Each plastic bottle is virtually unbreakable and includes a tight fitting cap for glaze storage.,

The Bailey Spray Gun sprays glaze in a “cone” configuration (Fig. 1) (as opposed to a “fan” pattern) and has an adjustable flow rate. It requires 2 C.F.M. @ 30-90 P.S.I. and has a 1/4” male plug connection (fits C-130-10 1/4” Female Coupler). Plastic bottles hold 1 Quart of glaze.

Small Canister Spray Gun
The trigger on this small 7 oz. canister spray gun is different from the typical “gun” style. The upper spray lever is actuated by the extended index finger and pressing down. This makes for a more comfortable action.

The spray pattern can be adjusted for horizontal/ vertical fan shapes or round. We recommend an air supply of 2.8 CFM at 30 PSI to 4 CFM at 50 PSI. The inlet is 1/4” NPT. This gun will give excellent control for a range of spray applications.

SUMMER SALE
35% Off List Prices on Most Paasche Airbrushes (unless marked "SUPER SALE")
Shop on-line as you would normally and checkout. Our sales staff will deduct the various discounts from the List Price shown and send a notification by email with your adjusted total before charging your account or credit card.

Paasche #62-2-3 Sprayer Unit
An efficient overall sprayer designed for a variety of fluids One of Paasche’s most popular sprayers, the #62-2-3 fills a range between an airbrush and spray gun. Sold complete with a 3 oz. Bottle Assembly and 3/16" x 6 ft. air hose. Air pressure can be from 1-40 p.s.i. depending on the type of material being sprayed.

• For stipple effects, use 10-15 p.s.i.
• For Light fluid applications (Inks, Dyes, & Watercolors) use 20-25 p.s.i. Requires 1-2 CFM @ 20-45 PSI.
• For Medium fluid applications (Varnish, Lacquers, Acrylics or Enamels) reduced to free flowing consistency use 25 to 35 p.s.i air pressure.
• For heavier fluid (automotive Enamels, Acrylics and Ceramic Glazes) - use a minimum of 40 p.s.i air pressure.
• CAUTION Do not use more than 50 p.s.i

Paasche H#3 Airbrush
Single-Action/External Mix with a #3 nozzle for medium fluids, sprays a pattern 1/32” to 1-1/4” wide. Excellent for most airbrush applications (other nozzles available - see below). Requires 1/2-1 CFM @ 20-40 PSI depending on fluid to be sprayed. Includes 1/4 oz. metal color cup, two wrenches, hanger and booklet. (Use with 1/8” air hose: C-072-216).

Paasche VL#1 Airbrush
Double Action/Internal Mix with a #1 nozzle for light fluids, sprays a pattern 1/64”-1” wide. Allows more control for finer detail work. (Other nozzles available; see below). Requires ½-1 CFM @ 20-45 PSI depending on fluid to be sprayed. Includes ¼ oz. metal color cup, extra needle and tip, Head Protector Cap, wrench, hanger and booklet. (Use with a 1/8” air hose: C-072-216).

Paasche Spray Sets

Paasche H-Set
Airbrush kit contains an ‘H’-style airbrush, with interchangeable nozzles #1, #3 & #5, 1/4 oz. metal color cup, 1 oz. bottle assembly, 1 oz. bottle with lid, wrenches, hanger and 1/8” x 6 ft. airhose with coupling and booklet. Airbrush requires 1/2 - 1 CFM @ 20-40 PSI.

VL Airbrush Set
Contains a VL style airbrush with interchangeable nozzles #1, #3 & #5, 1/4 oz. metal cup, 1 oz. color bottle, hanger, wrenches and 1/8” x 6 ft. hose, head protector cap and booklet. Airbrush requires 1/2-1 CFM @ 20-45 PSI.

Paasche HAPK Spray Set
An extremely versatile set for detail to medium coverage. Comes complete with (1) #62-1-3 sprayer (same as #62-2-3 but for light consistency fluids) with 3/16” x 6 ft. hose, a flow pencil with 1/32” NIB, (1) H#3 air brush with a 1/8” x 6 ft. hose, a 3 oz. bottle assembly, two wrenches and booklet.

Bottles

Complete Bottle Assemblies
Includes a bottle, lid, gasket and junction tube for joining to the airbrush (choose “H” or “VL” series).

"Color" Bottles
Includes a bottle and plain air-tight lid and gasket for liquid storage only (any series).

Paasche Airhoses & Accessories

Airhoses

• 3/16” x 6 Foot Airhose with 1/4” couplings (both ends) for use with #62 sprayers.

• 1/8” x 6 Foot Airhose with a 1/4” coupling at the compressor end, 1/8” at the airbrush end, for use with “H” and “VL” Series airbrushes.

Moisture Trap
MT Moisture Trap is a small 2” long unit that can be inserted into 1/8” airbrush hose to remove water from airline, thus preventing moisture damage and inconvenience.

3 Way Tee
Provides extra air outlets on air compressors having single 1/4” male outlets. Allows two airbrushes to be used off Paasche 1/4 h.p. Model D compressor.

Compressors | AirPen® | Bailey Glaze Tools

TOP | MASTER INDEX