Bailey
Kilns - Front Loading Deluxe & Pro Gas
|
Studio Deluxe 18/12
with Optional High Limit System #1
|
Even
at first glance, Bailey Downdraft All-Brick Gas Kilns exude a sense
of solidity. Bailey Kilns are massive, built from heavy tubular and
structural steel. Take a closer look, and you are immediately
impressed by a multitude of outstanding innovative features. |
|
Comparing Studio
Deluxe with Production
Kilns
Studio Deluxe front loading kilns range in sizes from 8 to 31 cubic
feet of stacking space. The Production front loading kilns range from 28
to 40 cubic feet of stacking space. Both Deluxe and Production kilns
utilize the same Double Skin Ventilated Frame construction with stainless
chimneys and vary only in their respective insulation profiles.
The Deluxe models have 4½”
of insulating firebrick in the walls, floor and arch. This insulating
profile is ideal for the small to medium range of kiln because it offers
an economical firing, and a cool cycle that allows a reasonable turn
around time. There would be no benefit to add insulation to this range for
typical stoneware firings.
The Production models have 6”
of insulating firebrick in the walls and 6¾” in the arch. This
insulating profile is ideal for medium to large kilns. The increase in
insulation thickness is more in ratio to the thermal mass that is being
fired. This is a more practical kiln for firing sculpture where the
operator intends to fire longer schedules than the typical stoneware
firings.
Click Here for Gas Kiln Introduction
Double-Skin Ventilated
Frame
Typically, gas kilns get extremely hot on
the exterior surfaces. With the increasing risk of litigation, insurance
companies are becoming more stringent regarding safety regulations. To
reduce the risk of burns, Bailey Corporation developed the Double-Skin
Ventilated Frame. With the Double-Skin, an air space is provided
between the hot refractory bricks and the exterior sheet metal. Air can
circulate through this air space, providing an exterior skin temperature
(over the vast majority of the kiln) that can be touched without causing
harm.
Click Here for
Frame & Insulation Features
This same Double-Skin technique also
provides the most efficient means of removing residual fumes (such as
carbon) that can leach through the kiln wall during the reduction firing
process. The fumes are contained as they travel in this shielded area to
the top of the kiln. With the addition of the (optional) Residual Fume
Hood, fumes are collected and removed immediately.
Click Here for
Venting
Safety Systems
Our standard 100% flame safety system provided on models with 12 to 40 cu
ft of stacking space is a “Base” style safety valve. This system uses
a thermocouple and pilot burner to prove flame presence prior to main
burner combustion. All safety valves used are AGA approved.
Click Here for Burner
Design & Safety Features
|
How to Purchase Front
Loading Gas Kilns
NOTICE: Because
we feel that purchasing a kiln and options is an important decision for
your business or school and we can offer much insight and advice to the
process, we do not allow our kilns to be ordered on-line. We would prefer
that you call our advisor staff and be assured the best engineered system
for your specific application. There are many options available to customize your purchase.
Click Here for Receiving
& Installation
Bailey Front Loading
Deluxe & Pro Gas Kiln Specifications
The chart below lists some of our
most popular sizes. We regularly alter our kilns to meet the specific
needs of our customers. From an 8 cu. ft. front loading Studio Deluxe to a
40 cu. ft. Pro, we can build to whatever specifications you require. Call
1-800-431-6067 for a quotation.
| DELUXE
& PRO Front
Loading Gas Kiln Specifications |
|
Code |
Model |
Stack Space (cu.
ft.) |
Inside Dimen.
WxDxH" |
Total Inside
Volume |
Outside Dimen.
WxDxH" |
Stacking Area
WxDxH" |
Wall, Arch Brick |
BTU’S CU FT
per HR |
Weight |
Approx. Gas
Inlet |
| Studio
Deluxe Front Loading Kilns |
|
M-404-207 |
Studio Deluxe FL 13/8 |
8 |
27 x 22.5 x 38.5 h |
13 |
46.5 x 58 x 63 h |
20 x 20 x 33 |
4½" |
95,000 86 CFH |
1300 |
N=1" LP=3/8" |
|
M-404-208 |
Studio Deluxe FL 18/12 |
12 |
31.5 x 27 x 41.5 h |
18 |
46.5 x 62 x 65.5 h |
24 x 25 x 36 |
4½" |
132,000 120 CFH |
1500 |
N=1" LP=3/8" |
|
M-404-209 |
Studio Deluxe FL 24/16 |
16 |
31.5 x 36 x 41.5 h |
24 |
46.5 x 70 x 65.5 h |
24 x 33 x 36 |
4½" |
187,000 170 CFH |
1700 |
N=1¼" LP=1/2’ |
|
M-404-210 |
Studio Deluxe FL 28/18 |
18 |
31.5 x 40 x 41.5 h |
28 |
46.5 x 75 x 65.5 h |
24 x 38 x 36 |
4½" |
220,000 200 CFH |
2000 |
N=1¼" LP=1/2’ |
|
M-404-210c |
Studio Deluxe FL 18-c |
18 |
40.5 x 31.5 x 46 h |
28 |
56 x 70 x 70.5 h |
30 x 28 x 41 |
4½" |
220,000 200 CFH |
2400 |
N=1¼" LP=1/2’ |
|
M-404-038 |
Studio Deluxe FL 34/22 |
22 |
31.5 x 40.5 x 49 h |
34 |
46.5 x 75 x 73 h |
24 x 38 x 43.5 |
4½" |
270,000 243 CFH |
2300 |
N=1¼’ LP=5/8" |
|
M-404-211 |
Studio Deluxe FL 38/24 |
24 |
45 x 36 x 41.5 h |
38 |
60 x 71 x 69 h |
36 x 34 x 36 |
4½" |
330,000 300 CFH |
3000 |
N=1¼" LP=5/8" |
|
M-404-212 |
Studio Deluxe FL 48/31 |
31 |
45 x 36 x 51 h |
48 |
60 x 71 x 79 h |
36 x 34 x 45 |
4½" |
360,000 327 CFH |
3300 |
N=1¼" LP=5/8" |
| Pro
Front Loading Kilns |
|
M-404-214 |
Production FL 28 |
28 |
49.5 x 36 x 46 |
44 |
67.5 x 76 x 77 |
40 x 32 x 41 |
6", 6 ¾" |
248,000 236 CFH |
2900 |
N=1¼" LP=5/8" |
|
M-404-215 |
Production FL 32 |
32 |
49.5 x 40 x 46 |
51 |
67.5 x 80 x 77 |
38 x 36 x 41 |
6", 6 ¾" |
360,000 342 CFH |
3500 |
N=1¼" LP=3/4" |
|
M-404-216 |
Production FL 40 |
40 |
49.5 x 40 x 54 |
59 |
67.5 x 80 x 85 |
38 x 36 x 49 |
6", 6 ¾" |
440,000 420 CFH |
3900 |
N=1¼" LP=3/4" |
Specifications subject to change without
notice. Consult with a Bailey representative before installing gas lines,
building a kiln site, or any other preparatory stages in installing a
kiln.
| Cone
10 High Alumina Fast Fire Furniture Kits |
|
High Alumina
Furniture Kits |
Studio 13/8 |
Studio 18/12 |
Studio 24/16 |
Studio 28/18 |
Studio 18-C |
Studio 34/22 |
Studio 38/24 |
Studio 48/31 |
Pro 28 |
Pro 32 |
Pro 40 |
|
Shelf Sizes &
Quantities |
(10)
10 x 20 |
(10)
12 x 24 |
(5)
12 x 24 & (5)
18 X 24 |
(15)
12 x 24 or (10) 18 x 24 |
(10)
14 x 28 |
(18)
12 x 24 or (12) 18 x 24 |
(24)
16 x 18 |
(28) 16 x 18 |
(20) 16 x 20 |
(24)
18 x 18 |
(28)
18 x 18 |
|
Post Assortments |
(6) ea. of: 2,4,5,
6,8 |
(6) ea. of: 2,4,6
,7,8 |
(9) ea. 1,2,3,
,6,8 |
(9) ea. 1,2,3,4,
6,7,8 |
(6) ea. of: 2,4,6,
7,8 |
(9) ea. 1,2,3,4,
6,7,8 |
(18) 2,4,6
(9) ea. 7,8,9,10 |
(18) 2,4,6
(9) ea. 7,8,9,10 |
(10) ea. 1,2,3,
4,6,8 |
(18) 2,4,6
(9) ea. 7,8,9,10 |
(18) 2,4,6
(9) ea. 7,8,9,10 |
All Front Loading Kilns require one
crate for shipment. There is a charge for crating.
|
Optional
Accessories
Before you place an order, use this list to determine what
accessories that you might require. Our staff will assist you in
this process.
|
- Venting
- U.V. Safety
Systems
- Kiln
Furniture
- Crating
- Combustion
Hood
- Residual Hood
- Oxygen
Analyzer
|
- Digital
Pyrometers
- Scissors
Track
- High Limit
Controller
- Detachable
Chimney
- Replacement
Thermocouple
- 2nd Stage Gas
Regulator
|
|
|
Click
Here for Bailey Front Loading Studio Standard Kilns
Click
Here for Bailey Deluxe and PRO Shuttle Kilns
Click Here for Oxygen Probe, Pyrometers, & Kiln Accessories
TOP
| MASTER INDEX
|
|
