Bailey
Kilns -
Commercial Duty Electric
|
3650 2-Car
Shuttle (36 cu. ft.)
|
Outstanding
Performance in Production Applications and University Settings!
Bailey
Production Electric kilns set the highest standards in commercial
quality at affordable prices. You can trust Bailey Kilns to
deliver a rock solid dependable performance. |
|
|
2750 Front Loader (21 cu.
ft.)
2750 Front Loader (21
cu. ft.)
(shown with optional hoods)
The Bailey Double Fume Vent
System protects your kiln and your kiln room environment.
Downdraft Fume
Ventilation
The Bailey Direct Fume Vent System (optional) is available on any of our
commercial kilns. Eliminate noxious fumes and protect the kiln
environment. Fume systems also extend the life of the elements and the
framework. Bailey systems also provide timer controls for an automatic
shut down cycle. For more information, refer to the page on Fume Vent
Systems.
|
Insulation
Bailey Electric’s 7" wall profile utilizes the optimal balance of IFB
(insulating Fire Brick) construction and mineral block to deliver high
temperature durability, minimize heat loss, and increased firing
efficiency. The arch brick is backed up with additional castable
insulation for added heat retention and stability during shipping. We do
not use fiber wall construction in our electric kiln. Fiber walls are
prone to mechanical damage, impossible to repair, and do not stand up to
element changes.
|
| Heat Control |
|
|
Whether you are firing sculpture or production loads, firing our
commercial kilns has never been easier or more efficient. Our
fully Programmable 3-Zone Digital 8 Step Controller will balance the heat
top to bottom perfectly. The controller automatically samples the top,
middle and bottom of the kiln with a thermocouple and adjusts the heat so
that all zones rise uniformly. |
| This is ideal for sculptural applications
where the density of the clay mass being fired is not consistent. With
ordinary switches, firing the kiln evenly requires frequent attention.
With the 3-Zone Controller, balance is automatic. Bailey
uses Mercury Relays (instead of mechanical relays) for
maximum utility life. |
Safety
A Keyed Power Switch
allows the user to ‘lock’ the kiln power off to prevent unauthorized
use: the kiln cannot be turned on unless the key is in place. In addition,
a Door Safety Switch prevents the kiln from starting up if the door
is not properly closed and shuts down the power if the door is
accidentally opened while the kiln is on.
An optional Digital Hi-Limit Back-Up is
available as a secondary shut-off. The Watlow LV-Series control allows the
user to set a maximum temperature at which the kiln will be shut down if
the Controller should fail to do so. This dual shut-off system practically
eliminates the possibility of overfiring due to mechanical failure or
operator error.
Bailey kilns use only F.M. and U.L. listed
components . Control
panels are fan cooled for extended relay and wire life.
Elements
All Bailey kilns have an element-in-the-floor for optimal heat
distribution. Our massive commercial elements are calculated at the lowest
watt-loss density to provide the longest possible utility life. Bailey
kilns have plenty of extra power, capable of firing massive loads in a
minimum of time. There is no comparison between this type of commercial
element and those found in a top loader kiln construction.
Construction
Bailey frames are constructed with heavy duty 1/4" thick structural
steel. Massive door hinges are designed to offer fine tuning adjustments
to obtain optimal heat seals. Side walls use 16 gauge sheet metal. The
frame is finished with a durable heat resistant paint. Our frames are
designed to reduce to a “smallest dimension” for passing through
difficult doorways. Call for details.
Shuttle Kilns
In addition to our standard Front Loading design, our Shuttle electric’s
provide the convenience and comfort of easy access stacking. Electric
shuttle kilns have a cart which pulls out independently of the hinged door
which is fixed to the kiln. Shuttle kilns are essential for sculpture or
commercial applications. Available with either one or two cars, track or
trackless. Call for a shuttle price quote.
Custom Features
Bailey Engineers are always ready to adjust a kiln design to fit a
difficult doorway, or, design a custom kiln to meet your specific needs.
Call us for a consultation. We can customize elements, insulation
tolerances, door swings, wire for high voltage (480 volt)... or whatever
you require.
|
Bailey Front Loader
Specifications
The chart below lists some of our
most popular sizes in front loading designs. We regularly alter our kilns
to meet the specific needs of our customers. From a 5 cu. ft. front loader
to 200 cu. ft. shuttle, we can build to whatever specifications you
require. Call 1-800-431-6067 for a quotation.
How to Purchase Front
Loading Electric Kilns
NOTICE: Because we feel
that purchasing a kiln and options is an important decision for your
business or school and we can offer much insight and advice to the
process, we do not allow our kilns to be ordered on-line. We would prefer
that you call our advisor staff and be assured the best engineered system
for your specific application. Prices shown here are listed as a reference
point. There are many options available to customize your purchase. A
freight quote will be generated by our sales representative.
|
|
Front Loading
Electric Kiln Specifications |
|
Model
Code # |
Total Cu. Ft. |
Shelf Area
Shelves per Layer |
Interior
Dimensions
(inches) |
Exterior
Dimensions
(inches) |
240 V
1 PH |
240 V
3 PH |
208 V
1 PH |
208 V
3 PH |
Ship Wt.
(lbs.) |
Kiln Price (incl
Multi Zone Controller)’ |
| Amps |
|
Fl-2022
C-210-001 |
5 |
18 x 18
(1) per layer |
20 x 20 x 22 |
46 x 39 x 69 |
48
(4) |
21
(3) |
42
(4) |
18
(3) |
1600 |
$5433 |
|
Fl-2027
C-210-002 |
6 |
18 x 18
(1) per layer |
20 x 20 x 27 |
46 x 39 x 69 |
60
(5) |
42
(6) |
52
(5) |
36
(6) |
1800 |
$6307 |
|
Fl-2426
C-210-003 |
8.5 |
22 x 22
(2) 11x 22 |
24 x 24 x 26 |
50 x 43 x 71 |
72
(6) |
42
(6) |
63
(6) |
36
(6) |
2000 |
$6464 |
|
Fl-2434
C-210-004 |
11.5 |
22 x 22
(2) 11 x 22 |
24 x 24 x 34 |
50 x 43 x 73 |
72
(6) |
42
(6) |
63
(6) |
36
(6) |
2100 |
$7285 |
|
Fl-2438
C-210-005 |
12.5 |
22 x 22
(2) 11 x 22 |
24 x 24 x 38 |
50 x 43 x 73 |
72
(6) |
63
(9) |
84
(8) |
54
(9) |
2200 |
$7903 |
|
FL-2450
C-210-006 |
16.5 |
22 x 22
(2) 11 x 22 |
24 x 24 x 50 |
50 x 43 x 75 |
144
(12) |
84
(12) |
125
(12) |
72
(12) |
2400 |
$9908 |
|
Fl-2729
C-210-007 |
12 |
24 x 24
(2) 12 x 24 |
27 x 27 x 29 |
53 x 46 x 73 |
72
(6) |
42
(6) |
63
(6) |
36
(6) |
2200 |
$7775 |
|
Fl-2738
C-210-008 |
16 |
24 x 24
(2) 12 x 24 |
27 x 27 x 38 |
53 x 46 x 73 |
96
(8) |
63
(9) |
84
(8) |
54
(9) |
2400 |
$9779 |
|
Fl-2750
C-210-009 |
21 |
24 x 24
(2) 12 x 24 |
27 x 27 x 50 |
53 x 46 x 75 |
144
(12) |
84
(12) |
125
(12) |
72
(12) |
2600 |
$11,964 |
|
Fl-3639
C-210-010 |
28.5 |
34 x 34
(4) 16 x 18* |
36 x 36 x 39 |
62 x 55 x 73 |
144
(12) |
84
(12) |
125
(12) |
90
(15) |
3000 |
$13,921 |
|
Specifications subject
to change without notice.
NOTE: Number enclosed in parenthesis ( ) denotes number of elements. |
|
|
The Furniture Kits for
the Bailey Commercial Duty Front-Loading Electric Kilns are composed of
the same high quality, Cone 10 rated dry-pressed high alumina kiln shelves
and heavy-duty Cone 10 Kiln Posts we have sold with our Gas Kilns
for years. Refer to the Chart below for the contents of each kit as well
as prices & ship weights. Shelf Patterns and post layouts are
illustrated for each kit.
|
High
Alumina Furniture Kits |
| Part
No. |
Description |
Shelf
Pattern |
Ship
Wt.
(lbs.) |
Price |
| C-210-FK1 |
For
FL-2022
(4) 1" x 18" x 18" Shelves
(6) each 2", 4", 6" & 8" Posts
|
Shelf
Pattern for
FK1 & FK2
(1) 18 x 18 Shelf
3-Posted as shown
|
175 |
$292 |
| C-210-FK2 |
For
FL-2027
(5) 1" x 18" x 18" Shelves
(6) each 2", 4", 6", 8" & 10" Posts
|
200 |
$378 |
| C-210-FK3 |
For
FL-2426
(8) 3/4" x 11" x 22" Shelves
(6) ea 2", 3", 4", 5", 6", 7", 8", 9" & 10"
Posts
|
Shelf
Pattern for
FK3, FK4 & FK5
(2) 11 x 22 Shelves
3-Posted as shown
 |
200 |
$467 |
| C-210-FK4 |
For
FL-2434 or FL-2438
(10) 3/ 4" x 11" x 22" Shelves
(6) ea 2", 3", 4", 5", 6", 7", 8", 9" & 10"
Posts
|
220 |
$534 |
| C-210-FK5 |
For
FL-2450
(12) 3/4" x 11" x 22" Shelves
(6) ea 2", 3", 4", 5", 6", 7", 8", 9" & 10"
Posts
|
240 |
$604 |
| C-210-FK6 |
For
FL-2729
(8) 3/4" x 12" x 24" Shelves
(6) ea 2", 3", 4", 5", 6", 7", 8", 9" & 10"
Posts
|
Shelf
Pattern for
FK6, FK7 & FK8
(2) 12 x 24 Shelves
3-Posted as shown
 |
230 |
$504 |
| C-210-FK7 |
For
FL-2738
(10) 3/4" x 12" x 24" Shelves
(6) ea 2", 3", 4", 5", 6", 7", 8", 9" & 10"
Posts
|
270 |
$580 |
| C-210-FK8 |
For
FL-2750
(12) 3/4" x 12" x 24" Shelves
(6) ea 2", 3", 4", 5", 6", 7", 8", 9" & 10"
Posts
|
300 |
$654 |
| C-210-FK9 |
For
FL-3639
(20) 3/ 4" x 16" x 18" Shelves
(36) 2" Posts, (24) ea 4" & 6" Posts
and (12) 8" posts
|
Shelf
Pattern for FK9
(4) 16 x 18 Shelves, 3-Posted and
arranged as shown *
 |
525 |
$1013 |
| *
NOTE: For the FK9 only there is a 2"x2" square ‘hole’ down the center of the
stack allowing better heat distribution through the chamber. |
|
|
Optional Accessories |
| Part
No. |
Description |
Price |
| C-210-028 |
Digital Hi-Limit Back Up System (installed)
|
$380.00 |
| C-210-016 |
Bailey Direct Fume Vent System
|
(see
link below) |
| C-210-018 |
Ceramic Thermocouple Protection Tube (installed)
|
$25.00
ea. |
|
|
Go
to Bailey Fume Vent Systems
TOP
| MASTER INDEX
|
|
